OILFIELD HYDROSTATIC PRESSURE TESTING

Hydrostatic Pressure Testing to 15,000 PSI for Drilling & Completion Equipment

Field pressure testing on BOPs, annulars, kellys, casing, frac trees, flowback equipment, manifolds, sales lines, and lubricators — using a Gardner Denver T-300, run by an API Spec Q1 certified contractor based in Rock Springs, Wyoming.

Oilfield and industrial equipment only. We do not test SCBA bottles, scuba tanks, propane cylinders, fire extinguishers, or residential plumbing.

PRESSURE INTEGRITY & VERIFICATION

Hydrostatic Pressure Testing & Hydrotesting for Oilfield Equipment

Hydrostatic testing and hydrotesting are the same thing – a hydrotest fills equipment with water, pressures it above its working pressure, and holds it to confirm the assembly will not leak or fail in service. Water is used rather than gas because it barely compresses, which means a failure releases very little stored energy — the reason hydrostatic testing is the accepted method for verifying pressure-containing equipment before it goes to work.

H&N performs hydrostatic pressure testing in the field using a Gardner Denver T-300, with testing capability up to 15,000 PSI. Tests are run on drilling and completion equipment at wellsites, yards, and facilities across Wyoming.

DRILLING • COMPLETION • PRODUCTION EQUIPMENT

Equipment We Pressure Test

Drilling Equipment

Completion & Production Equipment

Also Tested

TESTING CAPABILITY & EQUIPMENT

Testing Equipment & Documentation

Quote Request Form

Tell Us About the Job

Tell us the equipment, the test pressure required, and where and when. The more you can give us, the more precise the quote.

By sending this request you agree that H&N Gold Field Services Inc. may contact you about your inquiry. Your information is used only to respond to this request and is never sold or shared.

What to Include in Your Request

Tell us	Why it matters
Equipment to be tested	BOP, frac tree, manifold, casing, lubricator, sales line, or something else.
Test pressure required	The working and test pressures, and whether it falls within the 15,000 PSI capability.
Standard or procedure	API Std 53, ASME code, an operator-specific procedure, or customer specification.
Documentation needed	Chart recording, digital record, signed test report — say what has to be handed over.
Location	Wellsite, yard, or facility, plus city, county, or basin.
Timing	As soon as possible, within 7 days, within 30 days, or planning ahead.
Water and access	Whether water is available on location, and whether the site is accessible to a loaded truck.

PRESSURE-TESTING EXPERIENCE & CAPABILITY

Why Operators Use H&N for Pressure Testing

API Spec Q1 Certified

Registration No. Q1-3257 under API Spec Q1, 10th Edition. An audited quality management system, which matters more in pressure testing than in almost any other service line, because the value of a test is the credibility of its record.

15,000 PSI Capability

Gardner Denver T-300, covering the pressure range that drilling and completion equipment in this basin actually requires.

Field Testing, Not Shop-Only

Testing performed at the wellsite, in the yard, or at the facility, so equipment does not have to travel to be verified.

One Contractor Across the Location

Pressure testing alongside frac-iron support, valve maintenance, BOP lift systems and torque tools, hydrovac, and 15-ton boom truck services.

ROCK SPRINGS • WYOMING • ROCKY MOUNTAIN BASINS

Service Area

H&N works from Rock Springs, Wyoming, across the Green River, Uinta, Powder River, and Big Horn basins — including Sweetwater, Sublette, Lincoln, Uinta, Campbell, Converse, and Big Horn counties — and supports Denver-headquartered operators with Wyoming assets. Send the location and we will confirm availability.

Frequently asked questions

What is hydrostatic testing?

Hydrostatic testing - also called hydrotesting - fills a pressure-containing component with water, raises the pressure above its normal working pressure, and holds it for a set period to confirm there is no leak, deformation, or failure. Water is used instead of air or gas because liquid is nearly incompressible, so a failure during the test releases very little energy. It is the standard verification method for BOPs, frac trees, manifolds, casing, piping, and vessels before they go into service.

What pressure can you test to?

Up to 15,000 PSI, using a Gardner Denver T-300 high-pressure test pump. Tell us the required test pressure when you send the request and we will confirm the job is within range.

What equipment do you pressure test?

Drilling equipment including BOPs, annulars, kellys, and casing; and completion equipment including frac trees, flowback equipment, manifolds, sales lines, and lubricators. If your equipment is not on that list, send the details and we will tell you whether it is within our scope.

Do you perform BOP testing?

Yes. BOPs and annulars are among the primary items H&N pressure tests. Tell us the stack configuration, the required test pressures, and the standard or operator procedure the test has to follow.

How much does a hydrostatic test cost?

Pricing depends on the equipment, the test pressure, how many items are being tested, the distance from our Rock Springs base, the documentation required, and whether the work is scheduled or a call-out. Send those details and we will quote the actual job rather than a rate that changes once we arrive.

Do you test cylinders, SCBA bottles, propane tanks, or fire extinguishers?

No. H&N performs hydrostatic testing on oilfield and industrial equipment — BOPs, frac trees, manifolds, casing, piping, and similar pressure-containing systems. We do not test compressed gas cylinders, SCBA or scuba bottles, propane tanks, fire extinguishers, or residential plumbing. A DOT-certified cylinder retester is the right call for those.

Need Equipment Pressure Tested Before the Next Job?

Send the equipment, the test pressure, and the location. We will confirm scope, timing, and what the test record will look like.